Pickups and Preamps

The Prodipe GL21 Lanen is an Acoustic Guitar microphone designed for classical guitar, flamenco guitar, acoustic guitar and Ukelele. A totally new range of instrument mic systems for on stage recording of all your acoustic instruments. Prodipe have perfected an electret capsule that can take up to 140dB. At that level of performance the capsule will preserve the full harmonic envelope, which adds warmth to the sound of your instrument. The GL21 Lanen Acoustic guitar & Ukulele has been designed for acoustic guitars, ukuleles, mandolins and banjos.

For the clamp, they have chosen to develop two sizes of clip, rather than one single adaptable clip:

• The first type is for guitars with a thick soundboard or internally strengthened near the sound hole,
• The second clip is smaller and curved in shape - the mic can be positioned on guitars or ukuleles whose soundboard ribs are near the sound hole towards the neck side. 

The Prodipe BP-21 is an all-metal, completely insulated Phantom Power Battery Pack that comes with a 9 volt battery compartment to power any of the instrument mics from the Series 21, like the microphone GL21 for Acoustic guitar, classical guitar & ukulele. Prodipe has designed the electronics of the BP21 to ensure that there is absolutely no signal loss while on battery power. When the battery is removed, the BP21 belt pack operates as a mini XLR-XLR connector for a 48 volt power input.

The Kremona KNA NG-1 is a piezo-electric classical and flamenco guitar pickup ideal for these who doesn't want to modify or dig holes on their precious instrument. Encased in lightweight tone wood, the KNA NG-1 ensures the natural sound of your guitar. The KNA NG-1 installs safely and securely on the tie bar of your guitar utilizing the tension of the strings. NG-1 comes complete with a detachable and easily replaceable cable. When not in use, the NG-1 may be left in place with no detriment to the instrument’s acoustic sound.

The Kremona KNA AP-2 Portable piezo pickup with volume control is ideal for acoustic musicians looking for an easy, effective solution to amplifiy their instruments and control volume from the stage.  A handsome wooden casing houses both the passive piezo sensor and a high quality volume potentiometer. Attaches safely with enough PowerTack adhesive for multiple applications, while a detachable 1/8" to 1/4" cable allows the pickup to remain in place during storage. Suitable for classical guitars, flamenco guitars, acoustic guitars, Ukelele or Cajon.

The KNA UK-1 Portable Ukulele Pickup makes it easy to reproduce the authentic sound of your ukulele without modifying your instrument. Simply slide the UK-1 over the tie-down block and retighten the strings. UK-1 fits most soprano, concert, tenor and baritone ukuleles with a tie block. This passive piezoelectric system is designed to work perfectly with your favorite acoustic amp or through your preferred preamp. 1/8 "to 1/4" cable included.

The KNA SP-1 is a singe-coil steel-string acoustic guitar pickup that uses the fast and articulate attack of ferrite magnets. The KNA SP-1 amplifies the sound of your acoustic with a dynamic blend of clarity and balance. It’s high quality mahogany casing and light weight design ensures maximum sensitivity and durability. Installation is easy with no modification to the instrument required. Each pickup comes stock with an 8’’ detachable and easily replaceable cable.

Very high-quality triple-capsule condenser transducer with phantom preamp and mini XLR connection compatible with AKG Bodypack. The VS Audio Systems VS-3CAP is a state-of-the-art vibration transducer consisting of three very low-noise condenser microphones, enclosed in a hermetic capsule in a linear arrangement. This arrangement of the capsules achieves a greater pickup surface of the instrument, as well as an improved response rich in harmonics and a superior tonal balance compared to other systems that use a single capsule, thus achieving audio quality and a high range. unprecedented dynamics so far in this type of microphone. Ideal for classical, flamenco and acoustic guitar, as well as all kinds of string and percussion instruments such as the flamenco cajón. Its low profile body means that it can be used in most situations without compromising the performance of the musical instrument. It consists of 3 microphone capsules with 2.75m of resistant, flexible, balanced and shielded black cable, and an ultra-low noise Phantom preamplifier integrated into the 3-contact male XLR connector itself. Its sound is clean, without noise or feedback. Ideal for playing live or for studio recording. It transmits the percussed sounds on the top of the guitar. Requires +48V Phantom power for operation (not included). It works with the 24V phantom power of many acoustic guitar amplifiers. Includes 10cm of fixing adhesive. Made in Spain

Very high-quality triple-capsule condenser transducer with phantom preamp and mini XLR connection compatible with SHURE Bodypack. The VS Audio Systems VS-3CAP is a state-of-the-art vibration transducer consisting of three very low-noise condenser microphones, enclosed in a hermetic capsule in a linear arrangement. This arrangement of the capsules achieves a greater pickup surface of the instrument, as well as an improved response rich in harmonics and a superior tonal balance compared to other systems that use a single capsule, thus achieving audio quality and a high range. unprecedented dynamics so far in this type of microphone. Ideal for classical, flamenco and acoustic guitar, as well as all kinds of string and percussion instruments such as the flamenco cajón. Its low profile body means that it can be used in most situations without compromising the performance of the musical instrument. It consists of 3 microphone capsules with 2.75m of resistant, flexible, balanced and shielded black cable, and an ultra-low noise Phantom preamplifier integrated into the 3-contact male XLR connector itself. Its sound is clean, without noise or feedback. Ideal for playing live or for studio recording. It transmits the percussed sounds on the top of the guitar. Requires +48V Phantom power for operation (not included). It works with the 24V phantom power of many acoustic guitar amplifiers. Includes 10cm of fixing adhesive. Made in Spain