VS Audio Systems VS-3CAP High-quality contact microphone

ref. VS-3CAP - VS AUDIO SYSTEMS

The VS Audio Systems VS-3CAP is a state-of-the-art vibration transducer consisting of three very low-noise condenser microphones, enclosed in a hermetic capsule in a linear arrangement. This arrangement of the capsules achieves a greater pickup surface of the instrument, as well as an improved response rich in harmonics and a superior tonal balance compared to other systems that use a single capsule, thus achieving audio quality and a high range. unprecedented dynamics so far in this type of microphone. Ideal for classical, flamenco and acoustic guitar, as well as all kinds of string and percussion instruments such as the flamenco cajón. Its low profile body means that it can be used in most situations without compromising the performance of the musical instrument. It consists of 3 microphone capsules with 2.75m of resistant, flexible, balanced and shielded black cable, and an ultra-low noise Phantom preamplifier integrated into the 3-contact male XLR connector itself. Its sound is clean, without noise or feedback. Ideal for playing live or for studio recording. It transmits the percussed sounds on the top of the guitar. Requires +48V Phantom power for operation (not included). It works with the 24V phantom power of many acoustic guitar amplifiers. Includes 10cm of fixing adhesive. Made in Spain

€77.69
Quantity

Shipping fees
Add to compare
reassuarence-customicon  

Hand Made

reassuarence-customicon  

Made in spain

reassuarence-customicon  

Quality control

The VS Audio Systems VS-3CAP is a state-of-the-art vibration transducer consisting of three very low-noise condenser microphones, enclosed in a hermetic capsule in a linear arrangement. This arrangement of the capsules achieves a greater pickup surface of the instrument, as well as an improved response rich in harmonics and a superior tonal balance compared to other systems that use a single capsule, thus achieving audio quality and a high range. unprecedented dynamics so far in this type of microphone. Ideal for classical, flamenco and acoustic guitar, as well as all kinds of string and percussion instruments such as the flamenco cajón. Its low profile body means that it can be used in most situations without compromising the performance of the musical instrument. It consists of 3 microphone capsules with 2.75m of resistant, flexible, balanced and shielded black cable, and an ultra-low noise Phantom preamplifier integrated into the 3-contact male XLR connector itself. Its sound is clean, without noise or feedback. Ideal for playing live or for studio recording. It transmits the percussed sounds on the top of the guitar. Requires +48V Phantom power for operation (not included). It works with the 24V phantom power of many acoustic guitar amplifiers. Includes 10cm of fixing adhesive. Made in Spain

Quick Compare

Product
VS Audio Systems VS-3CAP High-quality contact microphone VS-3CAP Pickups and Preamps VS Audio Systems VS-3CAP High-quality contact microphone KNA HP-1 Acoustic guitar pickup KNA HP-1 Pickups and Preamps KNA HP-1 Acoustic guitar pickup VS Audio Systems VS-3CAP-BP (Battery powered) High-quality contact microphone DOUBLE OS1: Preamp system with pickup, internal microphone and effects
Availability
Price
€77.69
€70.25
€86.78
€80.99
Description

The VS Audio Systems VS-3CAP is a state-of-the-art vibration transducer consisting of three very low-noise condenser microphones, enclosed in a hermetic capsule in a linear arrangement. This arrangement of the capsules achieves a greater pickup surface of the instrument, as well as an improved response rich in harmonics and a superior tonal balance compared to other systems that use a single capsule, thus achieving audio quality and a high range. unprecedented dynamics so far in this type of microphone. Ideal for classical, flamenco and acoustic guitar, as well as all kinds of string and percussion instruments such as the flamenco cajón. Its low profile body means that it can be used in most situations without compromising the performance of the musical instrument. It consists of 3 microphone capsules with 2.75m of resistant, flexible, balanced and shielded black cable, and an ultra-low noise Phantom preamplifier integrated into the 3-contact male XLR connector itself. Its sound is clean, without noise or feedback. Ideal for playing live or for studio recording. It transmits the percussed sounds on the top of the guitar. Requires +48V Phantom power for operation (not included). It works with the 24V phantom power of many acoustic guitar amplifiers. Includes 10cm of fixing adhesive. Made in Spain

The KNA HP-1 is humbucking steel-string acoustic guitar pickup crafted for the discerning acoustic player seeking for a warm, clear and balanced amplified tone. The acoustic guitar pickup KNA HP-1 utilizes the power of neodymium magnets providing the strength and clarity one would expect from a humbucking pickup. It’s high quality mahogany casing and light weight design ensures maximum sensitivity and durability. The installation is easy with no modification to the instrument required. Each pickup comes stock with an 8’’ detachable and easily replaceable cable.

The VS Audio Systems VS-3CAP-BP (Battery powered) is a state-of-the-art vibration transducer consisting of three very low-noise condenser microphones, enclosed in a hermetic capsule in a linear arrangement. This arrangement of the capsules achieves a greater pickup surface of the instrument, as well as an improved response rich in harmonics and a superior tonal balance compared to other systems that use a single capsule, thus achieving audio quality and a high range. unprecedented dynamics so far in this type of microphone. Ideal for classical, flamenco and acoustic guitar, as well as all kinds of string and percussion instruments such as the flamenco cajón, bandurria, lute, mandolin, violin, viola, acoustic bass, ukelele, etc. Its low-profile body makes it suitable for use in most situations without compromising the performance of the musical instrument. 

 It consists of a microphone capsule with 2.75m of rugged, flexible, balanced and shielded black cable, and an ultra-low noise preamplifier integrated into the connection jack which also contains a rechargeable battery for up to 36 hours of use. Supplied with 10cm of adhesive backing and a USB charger cable for charging from a standard USB A port. Made in Spain

The DOUBLE OS1 is a guitar preamp with Bluetooth connection, effects and rechargeable battery. It combines the signal from a piezo pickup under the bridge saddle with an internal microphone for a natural sound. In addition to this, the DOUBLE OS1 incorporates a tuner, an effects DSP, Bluetooth connection and a small internal amplifier that increases the volume of the guitar by 35% to 50% without the need for an external amplifier. In addition, it can be connected to an amplifier, PA system or audio interface via its jack output. The DOUBLE OS1 is a complete electrification system to be installed on your guitar and requires holes to be drilled in the top ring of the guitar, the tailpiece and the bridge. Equipped with Bluetooth 5.0 connection to connect to a phone app and play audio, additional effects or drum beats through the guitar's soundboard without the need for an external amplifier. The preamp's built-in lithium battery can be recharged via its USB C charging port with any mobile phone charger.

No features to compare